Question about CLP 300 Laser Printer
black ink smudge on the left margin of the page. I checked about cleaning toner spills inside the printer, ollowing the manual instructions. Everything looks very clean, as the printer has been in use
Question about Magicolor 5450 Printer
Black smudge on side of paper when printing quanities Black smudge goes from top to bottom of the page on one side only Hey, Pleas check Black imagine unit,if needed change it. I've found these ...
...smudge with coloured prints? If so then the fuser unit is faulty. If it is only black that smudges it is likely to be the K Developer unit. Ensure that you are using genuine toners, not refills or ...
Question about Stylus CX5000 InkJet Photo Printer
I have black smudges on my printouts. I using I have black smudges on my printouts. I'm using Epson Stylus CX5000 Printer. The color cartridges aren't smudging. Just the black. I've cleaned it several
Question about Color LaserJet 2600n Printer
black ink smudges (1/32" wide x 1/16" high) are in right margin of all documents printed. Starting in upper right corner of page, 1/8" inboard from right edge of paper, they are spaced vertically down
black and white mode to scan with image size of A3 or A4 - half of the image is smudged on top and bottom. If I use greyscale the smudge is a little lighter -- if I use color mode, smudge is light but
...black smudge even when you're printing in color your problem is most likely the black cartridge. If it smudge in colors look at your transfer belt, open the front door, the big belt that hangs on the ...
Just replaced black cartridge in my 2600n color laser. I have smudged about a half inch wide 2/3rds over the right of each page. It only smudges in black. I have recalibrated several times. Printed at
leaves black marks on copies machine leaves black smudges - not lines on copies, and not on all of them- inconsistant in smudges- have gotten a few copies that are ok and then it smudges again. I ...
Question about Phaser 7700 7750 color laser printer Staple Pack 3 Re Refu
Black Smudges from Tray 1 MPT Getting black smudges all over the paper from tray 1 mpt. Tray 2 is fine. The smudges are fused. Dust, dirt, toner, in paper path, clean. -Carl
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions