Questions & Answers for: Ricoh Aficio black line

black line on it. If it has then clean with some alcohol based cleaning fluid once this is done reinstall and then print. If there is no line on the black roller try above the likely thing is that the

Faint Black Lines We have prints that have faint black lines (vertical) on the left edge of the paper. The lines go the full length of the paper and are approx. 1.5 inches wide. Is it the black ...

...black line down right-hand side The flatbed scans ok, but when scanning multiple pages with the ADF then print the document there is a black line about 1/4 inch thick down the right-hand side. There ...

...black line then you have dirty optic or **** glass. but if you have line on print jobs and copying job even after replacing the drum etc....check the fusing unit. if the line is not a fusing problem ...

Black Lines running down the right side outside of the print area I had thin gray lines all over the print area, and the REPLACE COLOR PCU error code was lit. I replaced the COLOR PCU - No help but ...

Unveven dark/light printing and vertical lines Unveven dark/light, black and white printing and vertical lines on the left side of the page Colour printing is ok? Replace black PCU.

...line about 1/2 inch in length extending from the left edge of the paper. Any thoughts? Couple possibilities: Fuser hot belt has wear lines transfering to the page Black pcu needs to be replaced ...

...am geting a vertical line in my print job. If the line is a colored it could be that color pcu or it could the fuser or black pcu if the line is gray. Black lines are a little harder to trouble

I have a Ricoh Aficio CL3500N When I print a vertical page there are thin black lines going down the left side of the page. What causes it?? And what can I do?? Hi, thin black lines are most likely ...

...Black line on the Ricoh Aficio 3045 Drum Help for Remove ???? There is a Black line on the Ricoh Aficio 3045 Drum and in each print or copy that's transfer on the paper . I've change the Drum blade ...