Questions & Answers for: my bissell proheat lost suction

Question about 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

1 Answer

...suction. It seems to be heating the fluids. Bladder is not empty; SmartMix bottle was not empty. Filter is not clogged. Pump hasn't lost prime. The pump belt is not cracker or broken. have you check ...

Ad

Question about 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

2 Answers

Bissell not removing any water from carpet Worked fine the last time I used it but not it is dispensing water and solution fine but not removing any water at all. Any ideas? there is a washer type of ...

Ad

Question about 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

2 Answers

...lost my books. check to see if the red lint filter in the clean dirty water tank is clean and free from fluff if this is glogged this will resticted the suction ,check to see if the tank is seated ...

Question about 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

1 Answer

...bissell proheat 2x ---will not suction up the water; but will suction when the tools are used. unfortunately, the manual is lost. Hi, Here is a tip that will give you all the information you need to ...

Question about 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

1 Answer

...suction is lost. seems pump fills with air and suction is lost. seems not to get enough fluid from resevoir. pump just replaced and everything else seems to work. when pump primes flow is established ...

Question about 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

1 Answer

...bissell proheat 2x has lost its suction from the floor but not from the tool. Hi, Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. Bissell ...

Question about ProHeat Turbo Deep Cleaner Upright Steam Vacuum

1 Answer

...lost suction?? It is on the bottom, close to the spinning brushes. It is the red plastic pushed down into the input of the vacum turbine tunnel that utilizes the vacum from the water collection tank ...

Question about 1699 ProHeat Clear View Upright Steam Vacuum

1 Answer

...bissell pro heat self propelled. I have had it for years and it has always worked wonderfully. Last time I was using it water started going everywhere. The self propel part is only working ...

Question about 14251 Little Green ProHeat &TurboBrush Machine, Deep Clean Carpet Cleaner, Heated H2O Injection, Powerful Wet Vacuum Suction Extraction, 12Lb

1 Answer

lost sucion Here's a quick link to troubleshooting. http://www.bissell.com/FAQDetail.aspx?id=1188&cid=ccsocial If you continue to have problems, here's a link to locate one of our Authorized ...

Question about 14251 Little Green ProHeat &TurboBrush Machine, Deep Clean Carpet Cleaner, Heated H2O Injection, Powerful Wet Vacuum Suction Extraction, 12Lb

1 Answer

...Bissell Proheat powersteam platinum II carpet cleaner that lost suction. Need to replace the pump which isnt worth doing because the heating element gets very gooked up and needs to be replaced also. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...