Questions & Answers for: biostar boot menu

...boot-up, the sata can be seen on the post screen. it is only when i try to install windows that the drive could not be detected. i will appreciate any input on this subject. thank you. You need the ...

Biostar GF 7100-M7, already install Windows XP SP-2 then I install all the motherboards driver. but then after I reboot my PC, it theres no display on my monitor but the CPU seems running. what should

the computor boots to bios window then freezes i try hiting delete to enter setup but comp is froze go to the start menu and find iexplorer and right click and select "create desktop shortcut". If you

boot it keeps going back to the menu with safe mode safe mode with networking last known and start windows. i already have xp on my hard drive but theres a problem. how may i fix this? Your XP keycode

...boot device menu in SETUP. SETUP is the software which allows you to change ROM BIOS settings in your PC. When you write "My Computer," specify which one: Mfr., and model# AND: Is is a laptop? ...

the problem is that it wont boot from cd/dvd..i updated bios..but had the same problem again,help please Most probably one of the following reasons.. - CD could be corrupted - CD was not written in a

...biostar n68s+3 Hi there, By default most motherboard with IGP (Integrated Graphic Processor) areconsidered as the primary graphics adapter unless you already configured the display to boot from PCI ...

...biostar-usa.com/app/en-us/mb/bios.php?S_ID=315The procedure of disabling yout built in VGA card is :1 .Get into BIOS pressing DEL while booting or F2    (it usually writes it on a ...

...biostar.com.tw/app/en/mb/introduction.php?S_ID=517#dl I think you have a bad power supply, try to renew this. Look also here: ...

...boot. Screen stays BLACK, NO beeps , CPU Fan runs, HDD-Drive seems to run (Red HDD-light after short time (Booting process ?) turns off. Insert of an Graphic board in PCI-E does not solve ...