Questions & Answers for: Dell OptiPlex bios rom

Bios by reseting Cmos and have pulled out the battery. Am I missing something. Any Help would be greatly apreciated. Thanks, Rogue The only thing I can think of is there should be a jumper pin that on

...Rom in the BIOS. When you start computer press either F2, DEL to get into bios, depending on the setup of your bios. Go into bios and under avdanced settings chang the boot sequence to read CD then A ...

...ROM BIOS Plus Version 1.10 A07 any suggestions? only options F2 for setup sau F12 for boot menu. this may or may not help, try taking out the cmos battery out (looks like a watch battery) and leave ...

...bios setting boot sequence -dvd rom first bootable device f10 to save and exit u can change the boot order in bios under boot and boot sequence. if it doesnt boot control is the cd rom rightly ...

...BIOS to boot on the CD rom first. You can set it via the BIOS utility. Usually you press the F5 key and then go to boot options. And then place your CD ROM drive on the 1st boot priority. Make sure ...

...rom's problem, ATA cable problem or bios settings problem. First of all make sure that your drive is set up correctly as primary or slave at the channel. Some motherboards have problems when the cd ...

bios and set the boot sequence to boot CD-ROM first and HD second. I press F12 and choose to boot from IDE CD-ROM. I then receive the message 'strike F1 to retry boot or F2 for setup'. If I press F1 I

...bios settings, search for the boot device, or boot priority. You must make your USB CD/DVD ROM as First boot, or just place it at the top of the list. You can adjust the position by pressing (-)minus ...

dvd rom boot how to present dvd rom in bios. Disable the appropriate SATA/IDE port corresponding to your DVD Rom Drive.

...Are Using! Just Go In To The Bios Of The PC To Make Shure It Is Set Up To Boot From The CD Rom Drive And Save And Exit The Bios Then Incert The CD Rom Disk And Fallow The Instructions On The