Questions & Answers for: bio excess

the same way - system will not complete the boot process, no video feed to monitor (so can't get to BIOS), fans and HDD spin up and power supply is fine, but we get no beeps. Your first solution would

...and high heat will cause applications to work slower than normal. One of the main functions of the BIOS is to monitor the temperature and adjust the operating conditions. While the sound of the fan ...

...If the drive hasn't been formatted, that is normal. On some systems, you also have to force the BIOS to recognize the drive by entering the BIOS setup (check with Sony or manual to learn the key ...

...the Pentium screen and stalls. Its probably trying to boot from your external drive. Go into your bios and reset your boot setting to HDD0 as your first boot device, Disk drive 0 second and floppy ...

the eject button is blinking and making sound continuously at the restating process and during bios also. i tried restarting it, removed the battery and pressing the power button, and like that tries ...

I have a compaq cq 62 but I can't shut it off. The power light stays on but it won't boot up nor shut down either one. This laptop is not that old. Not over 4 or 5 months and not used excessively. ...

no start up and continuous repeated long beeps? Hello Here are the bios beep codes: 1 long, 2 short Video adapter error Either video adapter is bad or is not seated properly. Also, check to ensure the

The fan on my Toshiba LapTop L655D-S5145 is noisy and disturbing. Is there a way to shut off the fan or at least make it quiet so it doesn't disturb other people in the room? Hi, Thank you for ...

How do I get the Latitude D505 BIOS to see a new hard drive 1. First off all Dell computers are Plug and Play but just to be sure try reseating the hard drive detaching and putting it back in 2.. Turn

...slow.the working becomes impossible...the diagnostic test is perfect...i have also updated my bios...i am not in position to pay huge sums to change laptop accessories..so please help me out.. ...