...carb and clean it .If it is fuel injection they will have to be clean to.This will happon when a bike set that ...
bike starts dies then wont crank overuntil i lift the gastank hi my bike starts up then dies then will not restart until i like hit or lift up on the gas tank it didnt start to do it until i got gas ...
...one . Have done ohm and resistance checks which are suspect but one thing not clear on is when the bike is running and the altenator is disconnected from regulator if i measure the ac current the
...COMPRESSION.Installed it on the frame everything is hooked up except the radiator and coolant. The bike will not start it will backfire thru the throttlebodies and pop thru the exhaust,any thing
my battery went dead so i took it off the bike and chargeg. put it back and nothing works, blown one of the fuses. took the battery to the dealer they tested and said the battery works backard ...
...hitting my headers. front end needs to be adjusted...meaning you need to adjust the height of your bike from the adjusters located at your triple tree....if not have those forks inspected for ...
2 cylinders not firing after i welded on frame of bike without unhooking battery I would check fuses and ground wires nothing else coil packes are fried its cheaper to unhook your battery if there is ...
2hg003470 is the serial number on my dirt bike motor can you tell me what the year is? you need to look at the serial number on the frame... what bike
FRAMES BENT BECAUSE THE FORKS WERE BENT I WOULD LIKE THE RAKE DIMENSIONS AND MEASUREMENT FROM SWING ARM BOLT TO FRAME NECK Hi, Muz_allworks for this situation I would call my local dealer or reputable
...If you don't have a meter, simply connect coil 2 and 3 to the wiring of coil 1 and 4 and turn the bike over and check the spark. if it is a stronger, then your 1 and 4 coil is the problem and will ...
Usually answered in minutes!
183 Questions
188 Questions
167 Questions
125 Questions
113 Questions