Questions & Answers for: Suzuki GS 650 GT bike frames measured

Question about 1982 GS 650 GT

2 Answers

...questions A friend of mine has one of these, and has recently had the problem of when it´s cold the bike won´t start. It was only cold for about four days, but when he tried to start it again, he had ...

Ad

...does anyone know the proper float setting diminsions? I would like to verify before installing on bike again. to check the float height, invert the carb body holding the float arm pin so the pin ...

Ad

... Im looking for a step by step pretty much. Also does anyone know of an online free manual for this bike? Thanks I believe if you lift the rear of the tank slightly and gripping the front of the tank ...

1982 suzuki gs650 runs, but not over 300rpm I recently bought this bike. Had been stored for a few years. Rebuilt the carbs, new plugs. It now starts fine, but wont run over about 3000rpm. Not enough ...

my bike runs real good and starts easy but just my bike runs real good and starts easy but just some times when i ride it for awhile and stop for a rest it wont start seems like the batt is dead but i

...is asking me to answer your question -- I have a 83 Suzuki GS650 GL This is a shaft drive bike, After about 30 mins of city riding the bike is idling at around 2 to 2 1/2 close to 3 rpms ...

i started the bike and gas was freely flowing i started the bike and gas was freely flowing from the carb overflow give your carb a tap at the bottom may be a stuck float is that dont work strip the ...

...the starter solenoid and chassis or anywhere there is a good battery supply and the frame of the bike and measure the voltage with the engine at a fast tickover. The reading should be 13.8 volts

...for a 1981 suzuki gs650g? And how many quarts of oil does it take? The Spark Plug Gap for the Bike is 0.6-0.7 mm or (0.024-0.028 in.It takes Roughly 3 and 1/3 Quarts. I would simply add 3 ...

Question about 1982 GS 650 GT

1 Answer

What's your problem?MY BIKE WONT CHARGE What's your problem?MY BIKE WONT CHARGE change your voltage regulator and if that dont work its the stator

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...