Questions & Answers for: Ford bike frames measured

fuel gauge stuck on full installed new ground from tank to frame no change, when i remove pos lead gauge stays at full , when i touch pos lead to ground gauge goes to empty. any suggestions! pos lead ...

Remove front axle on 2000 ford excursion Hi, Please follow the complete steps as provided bellow. 1. Before you remove anything off the truck, measure the pinion on the front and rear axle ...

will a front clip,cab,bed fit on a 2002 van frame if you measure the frames i think you will find the van is narrower

tire ? what are the max height for this van it has 225/75r 16 now? would be un able to give u a correct answer-if keeping a 16 rim than turn ur wheel all the way to left and measure the clearance from

...the dohickey that connects your two crank-arms together, and secures them within the bottom of the bike frame. The bottom bracket has threads around the outside that secure it into the hole in the ...

I changed my 1950 ford over to 12 volt and it sat for over 1 year now it wont start so I changed the solinoid ,and ignition switch ,battery,battery terminals and it still wont start and no lights hey ...

in a 2000 ford expedition does the cross member under the transfer case need to be removed? to take the transfer case out . if so how do I remove the bars attach to it ? First you need to measure the ...

..."Out of Square" measure the distance from the rear axle to a point on the frame on each side of the bike. To check the rim for trueness; take the wheel off the bike mount it on a holder (or just hold ...

What pre-strut car has the same wheelbase as a 1973 2 door Ford Maverick? I want to eliminate the struts on this car to open up the engine bay. I don't really care how it's done as long as it drives ...

2004 ford freestar engine light on , p0172, p0175 any idea. thank you the cause of , p0172 and p0175 P0172 - System Too Rich (Bank 1) The adaptive fuel strategy continuously monitors the fuel delivery