Questions & Answers for: Chevrolet Malibu big cam 4

2005 mulibu where is the oil filter is on a 2005 is 4 cylinder in the front black round you can put a big socket to remove its a cartridge thanks pierre

...My Rad fan does not kick when the temperature rises. ANY IDEAS??? 1997 Pontiac Grand Am 2.4L Twin Cam (not Quad 4) 154000 km on motor All original parts try chnging the temperature sensor for tha ...

...big block - 375bhp version - when oil droped from sump clean and clear, have removed valve covers on top of heads clean and clear no white froth, oil that sits on top of rad is pure clean oil not ...

...need a 1 1/4" socket. there is what looks like a big plastic nut. Remove the plastic nut and pull the filter out. if you do not have an 1 1/4" socket you can go to any parts store and by this

cam, rod and main bearings to wear excessively. You are the on the right track.. On the 4-cyl, the oil filter is on top of the motor just back of the oil dipstick,and is a big black plastic cup with a

Align the timing mark on the crank sprocket (2) to the mark on the bottom of the timing chain damper (1) and the timing mark on the cam gear (4) to the mark on the top of the timing chain dampener (3

where on spark plugs and wires on 99 - 4 cyl. Malibu w/ overhead cams pull the cover that has the 4 bolts in it on top of the engine. that is the coil/ignition module housing. the plugs are under it ...

...it up is it a knock or tap if its a tapping noise then goes away straight away its a week hydrolic cam lifter if its a heavy engin knock either lack of oil or big end bearing expensive if its ...

...4 cylinder engine?? If so the vct solenoids (variable cam timing) are mounted between the intake and exhaust cams through holes in the valve cover near the timing chain end of the engine (front). The ...

...Align the timing mark on the crank sprocket (2) to the mark on the bottom of the timing chain damper (1) and the timing mark on the cam gear (4) to the mark on the top of the timing chain dampener ...