Questions & Answers for: Chevrolet Lumina big cam 4

Question about 1995 Lumina

1 Answer

3.1 v6 when replacing the timing chain I turned the cam into position but the crank comes to a dead stop. Is this an interferance engine and if so do I have to turn the cam to a certain position to ...

Ad

Question about 1991 Lumina

2 Answers

...big aluminum thing on top of your engine) with a piece of tubing as a stethoscope. You'll know then if you have an air leak. If you are somewhat savvy with a wrench, you may be able to make that ...

Ad

Question about 1993 Lumina

1 Answer

cam GM V6 engine. These flat areas are used to align the (4) camshafts during timing belt installation. I found a link on the web which details timing procedures, with photos. There also appears to be

...BIG job!! Before even starting make sure that it is the core leaking. How? With the car warmed up and running have the heater on full. If you have antifreeze in the rad, the car will have a ...

Question about 1991 Lumina

3 Answers

...4 bolts holding it in place. Or the ignition coil and module assy is bolted near the camshaft housing cover under it. Follow spark plug wires back to the ignition module location on the following ...

Question about 1997 Lumina

3 Answers

...diconect the wires then u have 4 gas lines all u do is push them togther and then hold the clips and they will come apart then u got a big snap ring that holds the fuel pump in the tank that's about ...

...a wire missing. Dual overhead cam (euro)?the small purple wire will go to the small terminal on the starter. there should be 3-4 other wires that attached to the large terminal of the

Check powertrain in Chevrolet Lumina s (V6) 2005 model I have Lumina s (V6) 2005. Check powertrain sign came on. The computer scan give the following code (camshaft position sensor overadvanced...etc)

Question about 1993 Lumina

1 Answer

...4/5 time crank at TDC but still wont run like it should what i did wrong do i need to rotate the cam or suming does your cam have 2 marks on it? 1 might be on a tooth and the other in a little more ...

...cam sensors. Early versions of the RWD engine and FWD minivans used a distributor ignition system while all of the FWD car applications had waste-spark distributorless ignition systems. The only ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...