Questions & Answers for: bent screen Music

...screen with no response from any of the buttons. When I powered it up without a card it would say "No card, press enter", then I could operate most of the buttons but could not access the menu. After ...

...screen goes into a grove with rubber on the side. Note, some of these MAY have adequate access by removing the socket where the unit can set on a pole. You MAY be able to manuever the plug and ...

...on the headphone jack fails to connect the speaker when headphones are unplugged. The contact gets bent causing the

digikey.com/scripts/DkSearch/dksus.dll?Detail&name=497-8865-5-ND Depending on how the leads are bent... first one leads go down (V suffix), second they are bent horizontally(HS suffix)

Aux pots severely bent but not broken off. Shafts will SURELY break if you try to straighten them. Replacing these requires labor of removing a lot of knobs and screws... cost of the pots is minimal.

Broken headphone jack The jack is slightly bent so that the sound has lost all bass when plugged into a headphone socket. Does it change any when you rotate the plug a little?

Usb port's pins are bent Pins inside the keyboard's usb port are bent. the cord is fine, keys don't turn on when plugged into my computer though. So where should i get a ...

keys stick on yamaha wx11 It must have been dropped. Look to see if one side is bent so as to pinch the key. Gently pry it until it moves. Add lubricant if needed

...been playing bass for about a month and when I play it raddles ALOT I don't think that the neck is bent although if I look down it, it is somewhat bent but I don't know if it should be bent a little ...

...Cached Similar The Concord Piano Company was controlled and manufactured by the famous George P. Bent Piano Company of Chicago, and they built pianos for several ... Concord ' The Antique Piano ...