Questions & Answers for: Toyota bent door

door, see if it will open that way. If it opens, look at the hinged end, you will probably see a piece of plastic, which holds a piece of bent springy metal. If the bent piece of metal is missing, you

...door. Look to see if there is a bent piece of metal above the hinge. This is the "spring" that pops the fuel door open. If it is not there, it has broken, and needs to be replaced. About 3 dollars at ...

Thanks. Hold the door handle in the open position while using a bent coat hanger on the door catch lever.Sometimes a flathead screwdriver works to pry the door catch as well. Good luck, keep me posted

...others work fine? There are a couple of metal rods in the door that connect the handles to the latch. If the handle tab is not broken on the inside of the door then the rod might have bent a

...door jam. These wires are known to brake from being bent so many times from opening and closing the doors. This is how I fixed my seatbelt problem. It sounds like you may have a blown fuse

...,but i would try a pair of long nose pliars or a bent coat hanger on the rear door handle to pull the piece that open the door ,shouldnt be that difficult if you use your imagination to make ...

89 gts r rear inside pad wearing at a angle on one half of pad 89 gts r rear inside pad wearing at a angle on one half check for loose or bent calliper bolts or worn bushings ,or bent spindle housing

door henge bent I was backing out door hit something and bent backwards are there any fixes. As I understand it the was open at the time and was forced further open towards the front of the car? I ...

my door opens when i open my window one of the rods in the door has been bent ,some one must of tried to jimmy your door open ,like with a slim jim

...door handle but it still will not open the door. Sounds like linkage rods are bent or worn not pulling far enough to release latch. Or latch is worn not traveling enough to release latch ...