Questions & Answers for: Ford bent door

...door panel, check to make sure none of the lock linkage is bent. If it is bent try bending it back. If its not bent pick up a can of white grease and spray all the moving parts inside your door that ...

...bent the door backwards. I was able to bend it back to shut it but its all out of line and its got a huge dent and it only opens about 4-5 inches. what can i do to fix it so it opens correctly, pop ...

door lock. If the leaver was bent, the travel distance is shortened and does not push the leaver on the door luck to release it from the striker. Your going to have to remove the door panel and get to

...door, which is not really that hard to do. The main thing is don't force anything to come off. Make sure all the screw holding it is removed. After that the panel is held with plastic pins that lock ...

...the point that my tires run in to it, and another part is bent so far that i can't open my drivers door fully. how much does this cost to repare? Nothing. A crow bar and a hammer will pry it all

...*** out of it with wd40,close the door and open it,and keep repeating. look at the door switches one is likely broken or bent once you remove it you will know witch it is do one at a time and unplug ...

...an adjustment problem you most likely bent the hinge and or the door frame. it would require replacing parts and you should check a slavage yard. should have no probem finding something. good ...

...Chances are the autolock doesn't work because it "sees" a door open. Check the plunger between the door and the frame of each door to see if the plunger is broken, bent, or otherwise not

bent drivers side regulater new drivers side regulater (window works but the regulater is bent so it falls off tracks) Pull door apart replace regulator they are cheap on e bay

door is closed ck all your doors for one of the light switches to not be in place or posssibly broken off/bent , I fixed one of these for a lady who's son kicked the switch with his foot when gettting