Benq PE8700 - Won't Power Up The projector was working one day & then it wouldn't. I always had the unit left in stand-by mode. Went to turn it on from the front and unit did not respond. Tried the ...
lamp replacement The projector lamp went out so a new bulb was bought. after following the instructions for replacing the bulb there is no power. The light does not flash nothing. tried putting old ...
BenQ PE8700 will not turn on. We have checked the wires and connections. Also, we do not think that it is the lamp because the fan is not turning on either. Neither is the indicator light. you need to
...benq pe8700 projector I have replace the cooling fan on a Benq PE8700 projector but when I turn the unit on the projector will not startup Also there is red led that is on (steady) located on the ...
Question about PE8700 Multimedia Projector
My PE8700 does nothing when power is turned on. I checked its getting power into projector, checked little fuse at inlet plus/switch. Any suggestions if you get no leds, replace the power supply.
Question about PE8700 Multimedia Projector
...PE8700 projector Hi, Power Supply 100 ~ 240 V / 50 ~ 60 Hz Let me know, if needed further assistance. Hope i helped you. Thanks for using ' Fixya ' and have a nice day!! Where can I buy the power ...
...the fuse but it is all right. Putting the power on and try to turn this on but it is neither light or sign of life you'll have to replace the power supply. chances are the capacitors are dried
Question about PE8700 Multimedia Projector
...Benq projector wouldn't power up. We moved it around a bit and now it is not even starting up. We tried replacing the fuse and still doesn't work. I read the power supply may have to be replaced. I ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions