Questions & Answers for: Konica Minolta belt sensor

...belt, but sensor is not in transfer, it is inside main body of machine, maybe is dirty but you can't clean it because whole machine must be disassembled. There is a modification for transfer belt ...

Sensor in konica minolta bizub c450 IDC sensors are located under the transfer belt on the right sid eof the machine. Belt must be removed to clean sensors. Once belt is removed sensors are located on

...Sensor in konica minolta bizub c450 Remove the transfer belt. Then right below the fusing unit right where the edge of the transfer belt is located when normal installed right below where the edge of ...

belt unit is damaged.Reinstall or reconnect IDC sensor shutter or connector for every color unit and clean the sensors when vacuum cleaner after remove the all imaging units and the transfer belt unit

how do i shut idc sensor shutter on konica minolta c25 transfer belt Sensor is not on the belt it is in the machine

...sensor Located under the transfer belt, which mean the belt has to be removed then must know witch accurator to depress to open the cover that protect them when the belt is not installed. One is to ...

...of the registration sensors located under the belt on the right side of the machine, with belt out requires knowing what lever to push to expose the sensor to clean them or the have them

...belt on the other side. That assy. as Three sensors one is your PGC two of thee sensor are in the front one sensor is in the back be care each has small spring that is used to pull the shutter down ...

...belt retraction sensor cannot detect the transfer belt at its retracted position within a predetermined period of time after the transfer belt retraction clutch is turned ON. • During a pressure ...

...sensor located below the transfer belt. On the right side of the machine. Where the edge of the belt is and exposed below the belt and behind the large plastic part below the belt there are two ...