Questions & Answers for: Chevrolet belt replacement

2008 Chevy Equinox Where is the tightener for the A/C belt? The one big belt. This is setup on an idler assy. look for a solid wheel contacting the belt. Most likley your belt has stretched and will ...

Squileeng with the belt I just replaced the powersteering pump and the belt when I put the new belt on one of the pullies is locked up now it makes a loud squileing noise and the belt smokes.. I need ...

the belt squeaks like crazy, even after I added belt dressing to it a while ago check belt if its glazed replace it.. ck pulley and tensioner.. make nothing is in grooves replace belt with new belt ...

...belt? the recommended replacement is usually 60 k however i think that belt can go to 100.000 miles, i would not recommend that, because todays driving conditions, the serp belt is a separate belt ...

...belt - and any replacement - is properly aligned on the pulleys. Very often when you replace the serpentine belt the squeal will disappear but return again as the new belt "wears in". Your vehicle is ...

...belt does not stop noise (assuming noise is problem) most likely idler or tensioner bearing is bad and the idler or tensioner needs replacement. You can troubleshoot by carefully spraying a small ...

...belt replacement is required inspect the pulley condition to ensure there are no sharp edges on any of the pulleys, this will cause the belt to shred and fail. Confirm that all pulleys are free from ...

...replaced alternator. that one squealed 2. got another. still hear a squeel. does not squeel when belt is off. ALTERNATOR BELT NEED ADJUSTING AND REPLACING IT GLAZED. WHEN DRIVE BELT GET GLAZED ...

when i start my 2006 chevy silverado its making a squeking noise it sounds like its coming from the belt pullys but im not sure what else could it be i just had them replace a belt and the idler pully

how to put a belt backon a 2006 sonata how can I replace my belt for my 2006 sonata because I just replace the altenator You must loosen the belt tensioner to replace the belt, do not try and stretch ...