Questions & Answers for: belt is burnt

Question about Vacuums

1 Answer

belt burnt out?? I think the belt burnt out on my kirby but im not 100% sure and If it is I am not sure how to change it Thanx!! Christina Here are instructions for changing the belt. I have manuals ...

Ad

Question about Featherlight Bagless Upright Vacuum

1 Answer

...belt had burnt and came off the motor shaft. When I brought new belts and put them on the vacuum, they burnt right off (after just 5 minutes of use) and I do not know what to do. Is it possible the ...

Ad

Question about Featherlight Bagless Upright Vacuum

1 Answer

...burnt rubber smell. Checked the V-belt and it seems fine. Hi there, It might seem fine but the burnt rubber smell means that the belt is slipping. This causes friction between the belt and the motor ...

Question about 6594 PowerForce Bagless Upright Vacuum

1 Answer

smell of burnt rubber Hi, the smell of burnt rubber is an indication of a broke or stretched power head belt. The belt can be accessed usually form the bottom. Chrs

Question about 6594 PowerForce Bagless Upright Vacuum

1 Answer

...like burnt rubber after a few minutes. It sounds like one of the belts has become loose and is ...

engine has a burnt smell after belt broke engine started smoking after belt broke. burnt smell. Did the water pump or alternator lock up ?

Has a burnt smell, and makes a noise. The washer makes a strange noise, and it smells like a burnt broken belt. Could it be a broken belt? yes or a burned out motor coupler if its direct drive

...burnt rubber ,belt broke. Belt good conditions. Replaced belt and started. loud squealing noise, same burnt rubber. What's causing this to happen with car off and keys in pocket open hood and check ...

...burnt belt? It might be a belt. Some models have a belt and some do not. If it doesn't pickup dirt from a hard surface floor it may be clogged. If the brush roll isn't turning it won't work very well ...

...burnt rubber smell tells me your belt is slipping. Could be your head is set too low to the floor and causing too much pressure or your belt could be wore out. Ours did that and I had to purchase a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...