Questions & Answers for: Nissan Sentra belt

Question about 2004 Sentra

1 Answer

belt snapped looking for a picture where the pulleys are so i can see how to put this belt on. Its the one for the alternator.The other belt is still there and operational. I need to see how to take ...

Ad

freeing the belt from the compressor how? remove the belt with the help of a lever. first insert the lever between the belt and the compressor and then turn the belt so tat u can free the belt from ...

Ad

2005 Nissan Sentra 1.8S, with AC - how to replace belts? 2005 Nissan Sentra 1.8S, with AC. There are 2 belts: the narrow one (power steering...), and the wide one (alternator...) I was trying to ...

Question about 2004 Sentra

1 Answer

how do i tighten belt My sincere apologies for the severly delayed response. I am personally going back to answer your unanswered questions. I do not know if you still need this information, however I

Question about 1996 Sentra

1 Answer

replace belts/how to? replace belts Belts are the easiest thing to replace with a wrench, and a prybar. If you have a serpentine type belt, use a 1/2" breaker bar to relieve tension on the belt, ...

My car (nissan sentra 1993) is over heating could it be a timming belt came of? does this car have more than one belt Timing belt not likely cause. If your timing belt is off, the car will not run at ...

how do I remove the belt so I can remove the Water Pump? If you are referring to serpentine belt, Thisis how to do it. Lift the hood and prop it open. Find thelock nut on the serpentine belt and use a

Question about 1995 Sentra

1 Answer

i put a new alt. belt on my 2005 nissan sentra 1.8 and tighten the tenchner bolt and it bottom out and the belt is still loose just like the tenchner did not move. Compare the old belt to the new belt

Question about 1996 Sentra

1 Answer

timing belt when to replace Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing ...

Question about 1993 Sentra 4 Door

1 Answer

belt squeal when accelerate about 800 rpms noise stops for a while when you apply belt dressing or bees was to belt Could be your belt is loose or replacing.Also with belt loose,turn pulley with hand ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...