Questions & Answers for: belling grill problems

...Belling Synergie, grill ok , oven light on (thermostat) but no heat. Also trip switch went at same time so presumed it was element. ?30 element from electric shop and changed it in 15 mins. Remember ...

Grill problem I noticed that the grill element was cycling on/off on a low setting even though it was switched off at the oven control. I now have to switch off at the mains to stop this happening. ...

BELLING 552 ENFIELD/S front panel with gas on/off buttons on it, the silver paint under the lacquer is cracking having reported this problem to comet the cracking of paint got worse and started to ...

...belling bel-cj/ss25 microwave is no longer working the grill and oven heat up beu the mirowave and defrost function don't i have exactly the same problem. can't find much info about this anywhere at ...

...Belling Format 648. The top oven and grill are not heating up - though the fan appears to be working. Bottom oven fine. The light on the 'dashboard' doesn't come on for the grill or top oven either. ...

belling 492ss multifunction oven and grill. When grill turned on after 30seconds it trips the electric does it need new grill elements? Hi you have a definite short , it could be a bad element or a ...

...belling 335 and both the oven and rear left hob ring have stopped working. what is likely to be the problem? both the oven and the rear left hob ring stopped working at the same time. the small red ...

Timer stops at 1.5 minutes when cooking; everything else works; is there a future problem? bell chimes, everything works, the grill open, the heating and cooking seem to work... well it is a sunbeam ...

...Belling 100 dft range cooker. When I switch the grill off there seems to be a fan still on for a few minutes is this normal. I do not have a manual to check this out. this one has a down draft grill ...

...belling electric oven and separate grill. The two hobs on the left don't work, the grill doesn't work and the front elements in the oven itself has stopped. Is it fixable? Thanks. Go to the circuit ...