Questions & Answers for: beam light

Question about 1990 Land Cruiser

1 Answer

beam works switch to high beam spot lights work power at all 4 lights but no high beam. high beam indicator light on dash works All 4 lights is HIGH beam. The 2 that come on in 'LOW' are the low beams

Ad

Question about 1999 Sentra

1 Answer

beam doesn't light Hi, my right seal beam doesn't light. My question is, Can I replace it or I have to buy a new set of lamp with the seal beam included? I tried to make it light but nothing happened.

Ad

...beam light on dash comes on fuses are ok and replaced hi beam light. also the check service lt came on as well thanks DImmer Switch is Bad , May be Incorperated into the Multifunction Switch. Service ...

Question about 2005 Impala

1 Answer

...BEAM LIGHT BULBS WITH HIGH BEAM LIGHT BULBS BECAUSE HIGH BEAM LIGHT BULBS AND LOW BEAM LIGHT BULBS TWO DIFFERENT TYPES OF BULBS.WEAR CLEAN LATEX GLOVES HANDLING THE HEADLIGHT BULBS WHICH IS HALOGEN ...

2005 Hyundai Elantra 4-door Regular beam headlights do not work. Fog lights work High beam lights work Fuse for both high and low beam new lights for regular beam less than 6mths old. wonder is there ...

...beam light just no low beam lights. I have checked the fuses and all seem fine l was thinking it may be the relay switch/fuse unsure? If someone can help me that would be great. check the light globe ...

light bulb first but it did nothing. The drivers side low beam headlight still will not turn on. check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam

...beam only light up, the low / high main lamp goes off. all four headlights function well when tested, relays are newly replaced, power, ground and relay wirings are according to specs. would ...

...beam light terminal, if ok replace low beam bulb, if no voltage check switch side of relay, if voltage replace relay, if no voltage check headlight low beam switch. Turn headlight switch on- ...

on my high beam headlights work good it just the left high beam stays on a dim light while on low but when on high they work good It could be driving lights mode instead of low beam. Check connections

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...