Questions & Answers for: battery post moves tight

...battery. After fighting with this connection for more than a year, I finally put an old fashioned post adapter on the positive threaded side terminal, then put another 'marine' adapter on the post. ...

post and there is no visible corrosion on the battery terminals as well. When checking the cables, make sure the negative cable is tightly secured and screwed down tight. maker sure the positive cable

...battery corrosion if there is any on the terminal ends and tighten them down on the battery posts tight so they don't move. If that doesn't solve the problem, check the onboard computer trouble

battery post before taking off the starter.) If the lights did not burn bright, and the engine doesn't turn over. You could have a bad connection. On the Volvo, it has a positive wire and 3 wires that

battery. Make sure the battery is good. Make sure it can charge and hold a charge. Check your wires to the battery and make sure your post and ends are cleaned. Make sure the ends are tight, not loose

...battery posts are clean and tight, you should not be able to move them by hand. if everything is clean and tight get that jump start, if it starts you my have to replace the battery if you do, have ...

...battery terminals.Make sure it's on good & tight, then try to start the car - if that's not it. Get a jump, then go to Auto Zone, O'Reilley's, etc and get the battery & the ...

...clean on the battery, and the terminal connections should be so tight that you cant physically move with your hand, but tight is tight, and too tight is broke. So don't strip the terminal

...on the cables and or battery post? Take a wire brush or battery cleaner tool and get the contracts cleaned up and retighten. I'd bet that should solve you problem if you can start it with a

...battery posts are shiny clean and the terminals are tight moving the terminals on dirty posts is corrupting the cpu program in the ECM so try this make sure the battery posts are shiny clean the ...