Questions & Answers for: Yamaha XJ 650 battery low on yamaha dtxplorer

...battery-all grounds appear good-is there a capasitor or other relay???-low mileage bike-had it running last year till this problem-Help! I had this problem last year. I was told by a reputable Yamaha ...

Ad

...to the startter-does the starter engage but not turn the engine over (low battery or bad connections)or does the starter not engage (could also be bad battery but also could indicate starter

Ad

Question about 1981 XJ 650

1 Answer

...battery is up at least 11 - 11.5 volts A low battery will spin over and sound like it should when cranking sometimes, but the starter will rob spark from the ignition and not fire due to low ...

...low or the battery cables are dirty aND POOR ENOUGH THAT THE VOLTAGE AT THE COIL IS TO LOW TO WORK. sEE IF THE BIKE WIL start if you jump start the bike with jumper cables from a running car . If it ...

Question about 1982 XJ 650

1 Answer

connections are clean and I have tested all ground wires Your battery is low. You should have 12V or more on a good battery. If you have another battery or a way to run jumper cables try it to confirm

...battery in Yamaha xj650 Hi, Fabio for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you ...

...yamaha fj 600, run only with choke open won't idle without choke open Hi, Anonymous and the usual suspects are: 1. Fuel cap or fuel tank is not venting properly. 2. Fuel filter clogged. 3. Fuel ...

Question about 1981 XJ 650

1 Answer

...battery acid is really low. would it probley be the battery giving me the problem cause it ran fine when I parked it last fall. Hi. Yes more than likely it is the battery. Even when boosting it the ...

...battery low or dead. 6. Faulty ignition switch. 7. Faulty starter button. 8. Faulty kickstand or clutch pull in switch/sensor. 9. Security alarm needs a reset. 10. Starter relay, solenoid or starter ...

...Yamaha XJ650 it's overheating what would be the cause Hi, Charles and the usual suspects are: 1. Engine oil level and SAE weight are too low or not circulating. 2. Insufficient or blocked air flow ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...