Questions & Answers for: Ford F-150 base removal

F-150 whip style truck antenna The whip style antenna base on my 2003 Ford F-150 is loose. From what i can see it is held by screws that are screwed in from the top side. The problem is that the base ...

...taking the dome light off 2005 F-150, over storage rail If there are no screws in the dome lens or base of the light, use a small screwdriver or a plastic trim tool (better) to remove the lens by ...

Water Pump Base What is the base that the water pump actually goes on to called and how does it come off? It is a 88 Ford F150. When I took the water pump off the base or housing, whichever you call ...

...see what it is and it is preventing me from removing the battery there is a wedge clamp at the base of the battery, do u have that removed? there should be a bolt on one if the sides that is ...

...distributor cap on. Flip your cap up out of the way,not unplugging any of the plug wires. Mark the base of your distributor and engine block with a paint pen in line with one another. Next mark the ...

how do you remove headrests from 2006 F150 Ford There is a safety latch on the other round base, opposite the lowering button. When you pull the head rest all the way to the top position, press in on ...

base. Don't lose it; it's re-usable. Carefully pull the bulb straight out of the headlamp assembly. Don't rotate it during removal. WARNING Don't remove the old bulb until you are ready to immediately

...the TFI module retaining screws. To disengage the TFI module's terminals from the distributor base connector, pull the right side of the module down the distributor mounting flange and then

...Removal Remove the radiator grille opening panel reinforcement (8A284). If equipped, remove the front wheel opening moulding. Remove the pin-type retainer. Remove the screws. Remove the wheel opening ...

How do remove the antenna cap (cowl?) so I can retighten the three screws holding the base? use pliers but put a rag between to prevent scratching If it's a Ford antenna (OEM) you should be able to ...