barely hear. One day I was sitting in my car and noticed that the music shifted from the speaker that worked to the speaker that didn't work and now the music is barely heard. It sounds as if it has a
...radio on mute i hear bass sometimes and i bought new jack wires but they were not very expensive ones If you unplug the RCA's (Jack wires) and the noise goes away - your problem is induced noise. ...
...radio is on. The ground wire must be bare metal to bare metal and it must be tight. If this is new installation I would start by looking at the spot where the ground wire is bolted to the frame. If ...
Question about VB212PKG Car Audio Amplifier
...cleaned bare-metal on your car close to the amp).... if you give me some more info i can help u further... what is the make/model/yr of your car, what radio do you have, amp, sub, speakers,
...car audio amplifier 12v- red wire runs to your battery, recommend 4ga remote - blue wire run to a accessory wire or a remote turn on at the radio ground - black wire connect to bare metal, recommend ...
Question about KAC-X401M Car Audio Amplifier
...a low humming. i hear no music at all unless i turn the volume right to the top then i hear audio from bot channels but barely audible The main amplifer ICs have taken a dump. Time to go
hear my car through my speakers when i start my car i hear the car run through all of my four 6x9 speakers Chances are that you have the ground for the stereo or the amplifier not grounded well enough
Question about Pro-83 Portable Handheld Cb Radio Scanner Police Fire Emergency
barely can hear it In recent years public service and all land mobile has moved to narrow band FM from the old 12.5khz or 5khz bandwidth FM to new 2.5 and 1.25 khz format. The older scanners will play
Question about 2004 TrailBlazer
...barely hear speakers when they are turned all the way up and occationally the speakers work correctly Assuming this applies to all the speakers in the TrailBlazer, you likely have an amplifier ...
...barely hear the sound when I play a record If this is a new setup, some pickups require a preamp between the turntable and amplifier unless the amplifier has an input for low voltage inputs. Also ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions