Questions & Answers for: Zebra Symbol barcode font

how to change the display settings for MC9090-G RF Scanners Hello, if you go to support.symbol.com and download the mc9090-g users guide, it will walk you through changing your display settings http:/

How to Scan 2D barcode on MC55 (mc5574). How to enable Imager mode to scan 2d , as currently my mobile (mc55) only scans 1d barcodes. Thanks Hello, unfortunatley if your device is preconfigured for 1d

How can I configure my mc9090 CE with WPA/TKIP? i didn't do this in configuration mode in the Wifi Wizard. Thanks. go back to the wifi wizard and change it

How do I turn on the beam on a motorola MC9090 Motorola MC9090 will not scan bar codes when the trigger is pulled, no red beam comes out There may be a fault in the circuit that turns on the beam or ...

MC9190 will not scan a certain barcode, but the MC9090 will, what could be the problem? I have a scale that produces labels, the MC9090 will scan it, but the new MC9190, will not, what could be the ...

will not scan Try cleanboot if still doesn't work than check scan engine or flex cable for scan engine

how do i turn on the phone keeps turning off and not powering back on? recharge sufficiently,,then power on the switch for 10-12 seconds minimum

BAR CODE SCANNER AUTOMATICALLY REBOOTING/RESTARTING IF USB: change cable or try with another PC

Why doesn't it scan? I can't scan any thing the scan beam shows but it won't scan when I got it it worked and now nothing, i have tried different USB cords and computer, still won't scan. usually you ...

how to adjust brightness on display If you go to Start>Settings>Backlight and select brightness. You can adjust up or down from there. Tech Support Barcoding Technical Support