...banging sound that i could hear out side Hi, This is normally caused by defective dampers. Just like car suspension, these even-out the vibrations of the drum. When worn, the drum just bounces wildly ...
...banging noise and you can see sparks around the drum Sounds to me as though the main drum bearings have gone and the drum is catching the internal parts. I f the drum is turned by hand and it feels ...
Question about W120VW Front Load Washer
...burner is turning off. The burner flame itself makes kind of a low-pitched roaring wind sound. Thanks for using Fixya. Check that drum bearing , that is the most common cause for loud banging
...banging sound like there are heavy towels in it or off balance .lg dle2512w electric dryer THERE ARE TWO ROLLERS ON THE FRONT OF THE DRYER THAT KEEP THE DRUM IN PLACE, IT SOUNDS TO ME LIKE ONE OF THE ...
banging/tapping niose when the drum was spinning. It doesn't sound too good when turned manually. Is it the bearings and are they easy to fix? banging may happen due to low load also, as cloths form a
...bangs around when machine is running, drum still turns also get a scrapping sound when running. what could the possible problems be and fixes. your bearing is gone. needs a new tub assembly. its ...
...drum is not turning properly and I hear a loud banging noise! Anyone else had any problems like this? Sounds serious! If the drum is floppy, it probably means bearings on rear shaft.Or there may be ...
...sound while drying unsure if its the rollers or the pading is the unit level, open the dryer try moving the drum around, see if the drum loose, there mite something in the machine that got caught on ...
Question about Inglis IP8200 Dryer
...banging sound. Drum bearings If the tumble dryer is noisy when its turning and the whole appliance is shaking and rumbling, it could be indicative of a problem with the drum bearings, which help the ...
Question about Inglis IP8200 Dryer
banging sound when the drum turns. Is this serious? Those machines come with shipping bolts that hold the drum to the frame when it is shipped. This ensures that nothing gets slammed around when it is
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions