Questions & Answers for: BenQ bad video

Ad

Question about PB6100 Multimedia Projector

1 Answer

bad cable. Any suggestions? Am I missing something? You can get high defintion by connecting a cable that is component video source on one end your (dvd) and VGA (to projector)on the other. This cable

Ad

Question about FP71E 17" LCD Monitor

1 Answer

...these go bad then the power isn't stable enough to run the video board. The video board also has the controls that connect to the front panel.. so bad power, no video, no controls. Hope that helps

Ad

Question about FP71E 17" LCD Monitor

1 Answer

...on/off .the screen work normal for 5 minutes .......etc ? The video card driving the monitor or the video section of the monitor circuitry is getting bad, probably a capacitor on the board. ...

Question about FP937s+ (Silver) 19" LCD Monitor

1 Answer

...But try the video card first to see if that shores up the problem.. You might have some bad video memory but if the monitor has the line before your computer even starts up then its your ...

Question about FP731 17" LCD Monitor

1 Answer

...video then you know the original monitor is bad. If with the known good working monitor you still don't get video then you know its something either with the video card or the motherboard if you have ...

...bad capacitors resoldered has backlight no video benq fp567 no video after power on Check the connections at both ends of the cable to the LCD. If you've damaged the cable you can probably find a ...

Question about T903 19" LCD Monitor

1 Answer

...bad Monitor video cable.Or video device is bad. Try unpluging the pc completly from the wall for 5 min then plug back in and restart. Also check that connections are solid and tight on monitor video ...

Question about FP737S-D 17" LCD Monitor

2 Answers

...bad. If the video is integrated onto the motherboard, you can install a replacement video card in an open expansion slot. If you already have a separate video card you can replace it. If the computer ...

Question about FP791 17" LCD Monitor

1 Answer

...bad video card in the computer.  Do you have another monitor to try to see if the actual video output is good?  This is the easiest way of troubleshooting.When you start the computer, can ...

Question about FP791 17" LCD Monitor

1 Answer

bad picture my projector has bad picture. not very sharp focus even at 3m throw with no zoom. the colours leak especially red and the colours are not defined enough. washed out. when the brightness is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top BenQ Office Equipment and Supply Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Tom Chichester

Level 3 Expert

55370 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Are you a BenQ Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...