Questions & Answers for: Frigidaire bad gas

Question about FullFGX831C Size Stack Gas Laundry Center

1 Answer

...bad igniter. In order for your dryer's gas valve to open,the igniter has to be functioning properly. This is a built in safety feature to prevent gas from flowing without ignition. The igniter is ...

Ad

Question about FGR231A Gas Dryer

1 Answer

...flame sensor is bad the gas valve won't open. It also might be the valve itself. There are 2 coils that must open for the gas to get through the valve. If one of the coils is bad the valve won't

Ad

...gas valve once you have burn one drops out, from your description, it sounds like your hold coil is bad and will not HOLD the valve open, although only one may be bad, I would replace both as a pair, ...

Question about GLGF376 Gas Kitchen Range

2 Answers

...gas stove converted to lp. when the oven is turned on, the igniter glows but when the burner lights there is small bang or pop, is this normal or is the igniter going bad. Your ignitor is going bad. ...

...most common problem with gas dryers is the ignitor going bad.... Here is a tip that I wrote about that problem... http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not ...

Question about 30" Self-Cleaning Slide-In Gas Range - White

1 Answer

...gas oven valve would be bad is if it is open and has no continuity. That goes for the control as well. Check out this simple diagram of how a basic gas range operates. oven ignitor An ignitor must ...

Question about GLEQ2152ES Electric Dryer

2 Answers

gas and no heat is the ignitor going bad... Here is a tip that I wrote about that problem... Gas Dryer not Working Gas Dryer Not Heating http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas

Question about GLEQ2152ES Electric Dryer

1 Answer

bad... If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly. if you dryer is

Question about GLEQ2152ES Electric Dryer

1 Answer

...gas valve is bad or the ignitor/glow coil is bad,most likely the glow coil as gas valves don't fail,but both are in a series circuit and rely on each other to operate and light the flame,check ...

Question about Fasg7073Lw 7.0 Cu Ft Steam Gas Dryer

1 Answer

amps the coil will not trigger the gas valve to open, or it could be a bad coil. pretty rare that the gas valve is bad. I would start with the thermal fuse, it is usually located on the blower housing

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machine Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...