...If this is what you are saying, the screen voltage could be bad, and if thats the case, the picture tube or the flyback itself could be bad. You could also have a bad connection on the crt ...
...bad flyback. I don't have the diagram to check those valium. My questoin is: the flyback can be the problem, I think I have to replaced flyback end high voltaga block bicause eventing is connected, I ...
...flyback, that I've made a bad connection-- Or is it something besides the flyback which is causing this problem? Thanks for any help! If you had only ask before changing flyback, this is problems on ...
...bad i however have a new flyback number which is fsv20a001 i want to know if fsv20a001 as the same pin configuration as the bad one and will it work. i appreciation your quick response. HI Is the ...
...bad flyback. I don't have the diagram to check those valium. My questoin is: the flyback can be the problem, I think I have to replaced flyback end high voltaga block bicause eventing is connected, I ...
...Bad flyback. If I order a new one, will the flyback come with the red and black wires already. Not sure how to get the black wire off the flyback. IT twisted off turn clock wise and wirer should come ...
Question about D52W19 52" Rear Projection Television
...bad flyback 21.40 for the flyback but in the same fix you see 3 fuse by the flyback hit them with solder thay is the power supply for the conv, borad.i work for quaker tv i seen a lot of that d52w19. ...
Question about D52W19 52" Rear Projection Television
...bad flyback which i ordered and installed.the power lite blinks a few times and thats it.no sound or anythink.like its dead. That model uses the 270125 flyback which hardly ever fails. It sounds like ...
...flyback) 2. Bad connections on flyback & the little fuse next to it 3. Bad fuse near tuner 4. Bad picture tube This tv is known to have any of these problems. I believe the solution is: number 2. ...
...bad flyback transformer. This is a common problem that eventually goes bad in the ITC 222 chassis. You have to get the model number with the code at the end of it after the /. And sometimes you must ...
Usually answered in minutes!
2,403 Questions
2,258 Questions
1,642 Questions
1,423 Questions
1,437 Questions
