...bad connection on the control panel, or a bad relay on the control panel. If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info (as well as a text ...
fill with water over flows Dirt in your solenoids may be a problem. But other than that it could be bad solenoids in general. It could also very well be that the unit that senses the water level has a
...bad power connection, or just a bad connection, A bad timer or Bad Motor I would ckeck the power cord connections first and even the outlet. Making sure all the wiring is sucure. Of course make sure ...
Question about ASD2622HRQ Side by Side Refrigerator
Where are the switches to the fans? I think mine are bad, that is why the fan will not turn on These are always going bad...it is the defrost thermostat thats go bad or your fan motor..the defrost ...
...clicking noise compressor not running. The clicking could be the start relay.If the start relay is bad, the compressor will not start and you will hear a clicking noise in 2-5 minute intervals. The ...
...bad connection in the outler or in the washer plug or a loose wire where the plug connects to the washing machine. Turn off the power to that circuit and check each component until you find the loose ...
...me a few things really. the plug could not not be connected inside the unit could have a bad control board could be a bad switch. all in all you should have atleast a 30 day warranty ...
...likely you have a bad connection on one of the wires,check the thermal fuse wires,if you bought the element and the fuses all new check the new fuses,i've bought new parts that were bad from
...connection for it in this model. this model DOES use a probe,look inside for a port,like a headphone plug,unplug your microwave and use a couple toothpicks and gently push thenm into hole and move ...
Question about ACF4225AS Electric Kitchen Range
...connection there. Unplug the power cord and check to make sure your connections are tight. While you have it unplugged, look and feel around the bake element to see if it is smooth all the way around ...
Usually answered in minutes!
114 Questions
34 Questions
25 Questions
18 Questions
15 Questions