Questions & Answers for: Jeep bad brakes

...work. third brake light is working checked fuses ok . checked all fuses even under hood? may have bad signal switch or bad brake light switch yes even if 3rd brake works.also check wiring under

...o.k. check the brake switch on top back side of brake pedal. it is out of adjustment or is going bad. if bad or out of adjustment, brake lights will not work. adjust the brake

...brakes seem to work ok and when i select cruise control it will not set Do your brake lights work? Your cruise is tied in with your brake lights. If your brake lights are stuck on or there could be a ...

...column there u will find ur brake switch check that proper mounted than test switch and replace if bad Check operation of the brake light switch, located above the brake pedal lever arm under the ...

...fuses seem to be fine. What do I check next last one i messed with that had the same problem had a bad brake switch up by the brake pedal, and one of the twist in connectors on the brake light was ...

...brakes checked, you may have a bad hose or sticking caliper, also if you have drum rear brakes then the rear drums may be out of round, this is if its the rear brakes that are grabbing, if it is then ...

...break lights on when is shut off If you mean the rears brake lights, you more than likely have a bad or mis-adjusted brake light switch. It's tough to get at. Located on the upper side of the

no brake lights Check for a bad fuse in the fuse panel under the dash and the brake light bulbs in the brake light housings for bad bulbs. Next check the brake light switch at the brake pedal to see ...

...bad brakes there
why not get the brakes checked by a real shop
ASE shops rule
ABS NEEDs good brakes FIRST.
1 case in point a grabbing brake, or other odd behaviour)
ever google search ...

...brakes, pin 2 goes to: 12v good (with in 1/2 a volt of actual battery voltage)!! 6v bad. shorts any thing less than 10v, bad. shorts easy no? 0v bad, switch bad, or not ADJUSTED LIKE THE BOOK ...