Questions & Answers for: Mitsubishi Eclipse bad boys 2

please help me with this eclipse, 2000, GS I have a 2000 Mitsubishi Eclipse GS, With a problem from three weeks ago. First of all, the car stopped at 65 mph on the freeway. I replaced the fuse, under ...

Ad

...bad. 4. Not the water pump unless you are loosing water all the time. Timing belt runs the water pump & you need to tear down the engine. If so ,you would need to replace the timingbelt,tensioners, ...

Ad

key will go in and out but will not unlock the wheel to start the car sounds like a worn key tumbler problem try spraying a little rust check into the key hole that may fix the issue if it doesnt then

will my 97 eclipse gst need a universal bypass module so i can hook up a ready remote alarm and remote start system forget the boy racer alarm ,it will cause no end of problems in the future ,just use

the cloth is coming off my sunroof where can i get the cloth and how do i replace it what glue to use and how much am i going to have to take off the interior in order to fix this problem ?? If you ...

Question about 1996 Eclipse

2 Answers

Park brake adjustment 1992 mitsi mirage 2 door. Rear drum brakes not disc. Park brake lever pulls right up but still works well. Is it possible to adjust the cable or is it self adjusting and ...

...Boy, Don't throw that old trans away, It is most likely OK. Did you change the filter and fluid. A bad speed sensor or a bad torque converter lock-up solenoid will result in a loss of overdrive ...

boys brought a1992 magna exeutive been going wellparked in drive way next morning wouldnt start all vitalswell (petrol oil battery ) when turn key occasionally it clicks or nothing Starter sounds like

Hello. Car alarm problem on a 2002 Mit. Eclipse Spyder. Is there any way to disarm the alarm system without affecting the front headlights & main horn?? Thank you. if factory immobilissor dealer ...

Question about 2002 Eclipse

1 Answer

My 2002 mitsubishi eclipse 2.4L is having starting problems, first I used a multimeter to test the battery, 12.6V is where it read without starting the engine, when I do try to start it the multimeter

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...