Questions & Answers for: Legacy Audio bad audio

...can someone help me find the problem ?? First thing to look for would be pinched speaker wires,or a bad ground, or a loose b+ wire. The next would be to have the amp bench tested and the tech should ...

...audio repair facility. They will need to doi a bench check on the amp with load resistors and a tone generator. If the amp preforms good on the bench, then you should start looking for bad speakers ...

...till i turn it off? what is the problem and how do i fix it???? buy a new amp! You probibly have a bad RCA cable that happend to my on my brand new MTX thunder amp, try that or else move your ground ...

... We tested all the connections and they seemed good. Not sure what to try next. it is most likely a bad ground, that should do ...

...audio amplifier is in protect mode. how can i fix it? Is that on all the time or are you saying the light is on? If that light is always on that just means it's protecting your amp. If it's off and ...

amplifier has went into protection mode. What dose this mean. it means you may have a shorted speaker(s) or speaker wire(s) or the amp itself may be bad.

Protect light is on ,no sound? Make sure you have a good ground connection. The ground wire should be solidly connected to the vehicle chassis in a paint-free location. If the ground is connected ...

...built box. it is hooked up with 8 guage wire system and has a 30W fuse. it is overheating really bad and don't know why? do you have any suggestions? You need to look at your wiring of the