Questions & Answers for: Samsung ML back paper out

...paper then feeds back out leaving about an inch in the printer but with no back page printing having been carried out. I have tried a few sheets of really expensive paper, and tried reducing the ...

... can u see any part of paper anywhere in paper ,usually it gets stucked on the back side in the fuser assy ,remember dont try to remove any paper with any metalic tool even if u find any peice of ...

...stuck underneat the printer. Open front door, pull out toner and chech under toner, put toner back , restart and try. Open back door and check if there is a second paper sheet stuck inside

...paper jam. I finally had to take off the back and cover to discover that there was, indeed, a small piece of paper invisible otherwise (torn off of the paper I removed). I removed the piece with ...

...out, check switch inside near Loding roller put you paper back and Put the tonner cartridge back, close the door and try agian ( i solved my problem this way) ...

paper got jam at the back of the printer near exit. make sure that the fuser 2 green latch is down and not up. 3. try remove your toner and power up your printer and see if the sound is still loud. if

...from there as well (although you may want to remove all the paper that hasn't been grabbed yet). Just keep wriggling back and forth gently so as not to tear the paper and lose a little scrap

...printer. so try it you remove the toner and open the back of the printer, to see if there is paper left in it. After you have successfully cleaned toner try plug it back and try to switch it on

...back ,folded so tight nothing was showing. Mine has a back door and the paper is having trouble rounding the last bend and coming out. So I leave the back door open to get my copies. Green light

...back. In a case where paper were teared apart, you may use a household tweezer to remove the bits of paper. Installed the toner again and try to print, excess or other bits of paper may go with paper ...