Questions & Answers for: Gateway back cover

back cover is removed, and since the object of disassembly is removal of the back cover, it's a Catch 22 situation. The hinges on the back jam against the back cover, and it can't be removed until the

I have to get the cover off of my Gateway DX300S to replace a power supply. How do I get this cover off. I got the cover off by just sliding it off, but now i can't put it back on

...cover from a Gateway 500 series??? Like this Gateway SE? http://support.gateway.com/s/PC/2800071/280007101.shtml On the back of the computer remove the screw from the top middle. Now remove the screw ...

...back cover (all around the back). Do not remove the screws on the AC power socket. Next, look in the seam between the front and back covers, especially along the bottom, for any latch slots. Study ...

...back cover at the top right corner by the silver and black. Push on the black plastic and pull up ******* the cover and it will pop right off. This works - I am not a tec and I did it Should be ...

...else. Model number ZX4800-06 You don't need to take apart all the back cover. Only the small rectangule part where the back support is located. The hard drive is located under the small

how do I get the back cover off of a zx6971all in on computer? BACK COVER HAS 2 PHILLIPS SCREWS. I REMOVED THEM AND THE COVER STILL WONT COME OFF fotbalist

Back Cover, and the large metal Static Shield, the highly static sensitive hardware parts are now exposed. You can static shock them out, and not even know it. POOF! No computer. [The most susceptible

How do I remove back cover of zx4970 CD fell inside How do remove back cover of zx4970 YouTube

...but the unit still does not come apart. Grab both sides of the cover and slide it back. the cover has metal tabs that go into slots in the case. Pull up and off once you have moved the cover