Questions & Answers for: Hasselblad back up

...won't close fully I am looking at purchasing a 503cx and noticed that when the rear curtain folds back after firing sometimes the bottom curtain does not close fully, leaving a tiny gap that does ...

503CW with leaf back Unwanted drag flash effect appeared while shooting with flash light, camera well fixed on tripod with 1/125 sec. speed, and 16,5 f. In door. Have any one experienced mechanical ...

Hasselblad 555ELD My attached Digital Back has play in it. It does not seat firmly against the body. It can wiggle or pull outward by 1 mm. This would change the focus by the amount of play, but in ...

(indicates red status). What can I do to solve the problem? 1: Put in the dark slide. Does the film back remove? If so, do that. 2: Can you remove the lens

adapt a Hassie 500el/m to a Imacon ixpress back V 4.7 Can this be don? The Hasselblad ELM does not need adapting to use the Imacon or hasselblad digital back  the following backs fit on the ELM ...

Hasselblad 500cm body frozen/jammed I shot a frame and removed the magazine back, all seemed fine. But now the body now will not wind on, it is jammed. The mirror is up, and the shutter closed but I ...

...windows; tubes in show cabinets; computer screens etc) on my 50mm.lens with my Leaf Valeo 22W back, on anything longer than an 1/8th. sec., even with flash as well, I get a magenta fringing, or ...

i have a hasselblad 503cx. when i hit the shutter button, the back part of the lens opens (where the film is) but the lens shutter is closed. when i let go, the lens opens and the back closes. The ...

...off the camera body There should be a small slide-switch on the wind knob itself. If you slide it back, the knob will rotate backward slightly and pop off the

...it on I push the red button and nothing happens. Is there a fuse I should replace? I just got it back from the company in New Jersey and do not want to do this again. Is there anyone who makes ...