Questions & Answers for: Harley Davidson FXDWG Dyna Wide Glide axle nut

need torqe spec for front wheel axle 1998 fxdwg dyna wide gliude Tighten the axle nut to 50-55 lbs. The slider cap nuts 5-11lbs

...axle nut. Then loosen the two nuts of the clamp on the bottom of the right fork slider. Tap the axle out from the nut end. If it's tight, screw the nut back on just far enough to protect the threads ...

What is the torque spec for front and rear axle nut for a 2005 Wideglide Harley Davidson? 50-60 foot pounds each.

...axle won't come off @ removed the main nut on the shaft and the right side bolts and the shaft will not slide out. Hi, Anonymous it could be the axle bearings are rusted and locked up, for this ...

...wheel from fxdwg What year??? Remove brake calipers if necessary to get the wheel out from under the fender. Loosen the axle cap bolts and remove the axle nut and washer and axle and remove the

...axle nut @ torque spec rear axle nut Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, ...

...axle nut torque spec @ need torque specs for 2003 fxdwg front axle nut Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a ...

...axle retainer nut and remove it and washer and then pull axle out and remove tire and wheel assembly. reverse to put it back on and tighten Front caliper mounting bolt 28-38 ft-lbs 38.0-51.5 Nm and ...

torque specs rear axle nut 99 wideglide Rear axle nut 60-65 ft/lbs- 81-88nm

...a socket or wrench to loosen the axle nut and an Allen key for the adjuster bolts and a torque wrench to tighten the the axle nut to 60 ft-lbs (81.3 Nm) but in no case to exceed 65 ft-lbs (88.1