...AUX setup with 30135 Unlocking Volume Control For A Single Device (Individual Volume Unlock): Press a desired mode key where you want volume to be unlocked (e.g., AUX) and controlled within its own ...
Question about 1200W 5.1-Ch. XM-Ready Home Theater System w/5-Disc Upconvert DVD Player
SETUP until AUX blinks and enter 1932. Press the power button and it should turn off the reciever. *UNLOCKING VOLUME CONTROL* You must until your AUX volume control in order to use your Comcast remote
Question about 1200W 5.1-Ch. XM-Ready Home Theater System w/5-Disc Upconvert DVD Player
...setup mode. Press SELECT button until AUX appears. Rotate the volume knob to toggle the setting to "ON". Press and hold the select button to return to play mode. Thanks for using FixYa - a FixYa ...
setup menu and switch aux input to ON but I can't figure out how to get into the setup menu either... If anyone has any info on this it would be greatly appreciated Try this site for free manual http:
...setup until Aux lights up. Enter code. If you want the remote to control the receiver all the time, press Aux and then hold setup until Aux lights up. Enter 993 then press Aux. Aux will flash, now ...
...Aux - Setup (2 blinks) - 11144 (2 blinks)Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinksAux - ...
...Aux - Setup (2 blinks) - 11144 (2 blinks)Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinksAux - ...
Aux - Setup (2 blinks) - 11144 (2 blinks) Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks Aux
Aux - Setup (2 blinks) - 11144 (2 blinks) Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks Aux
Question about Vision Pro 8000 Touchscreen Thermostat
...AUX heat The system type has been incorrectly set during the installer setup. The t/stat thinks there is auxiliary heat equipment that is controlled by a signal on the Aux-E terminal which you ...
Usually answered in minutes!
6,444 Questions
5,458 Questions
4,073 Questions
2,451 Questions
2,269 Questions