Questions & Answers for: NAD aux channel

NAD C350 stuck on "auxiliary" input these are electronic switches - but any time I switch from AUX to one of the other inputs, it immediately switches back to AUX. If I hold the button down for one of

for my TV instead the volume is really low. ay idea? thanks take audio out from tv and insert it in aux in in your amp

...about an hour until the red light turns green. Also, when I change input selection, eg from CD to AUX, the green light for AUX lights on but the sound input remains from CD. If all components are ...

AUX problem between my laptop and NAD C 320BEE The sound is coming from way back and choked when I connect my laptop via AUX cable to my NAD C 320BEE. I open the sound to full on amp and full on ...

...AUX channel but the laptop doesn't seem to work with the NAD C 320BEE hi-fi amp. I didn't change the properties. The AUX cable is working. The amp is working when I connect to line in and the amp ...

My NAD C350 won't allow me to switch input source - permanently on "AUX". Any idea as to cause/fix? Also I need to switch out my power 220v power supply for 120 (US). Would appreciate guidance here as

NAD C320 BEE - goes silent. Only yellow light. NAD C320 BEE - so I'm listening to it in AUX mode, have it connected to my laptop to listen to i'tunes. Suddenly it went silent. The light is yellow and ...

...the mixer to AUX channel there is no sound. What am I doing wrong? It must be connected to a master output of the mixer or the record, or second zone. Aux is an input and will not transmit

...headphone jack (for mp3) and RCA left/right to connect to your NAD 320. You can connect to CD or AUX in the back and then you will need to change the input with remote or with on board buttons to ...

aux input. 4.THIS AMP CAN DRIVE 4 SPEAKERS USUALY REFFERED TO AS, A and B. If you are only driving 2 speakers say from the A output, try swapping the cables to the B output. Also try switching between