...UP TWO TIMES AUX1, AUX2, SHOW UP, THAN SENT ME BACK TO CHANEL 3 ALL THE TIME. Go into your menu of the tv and reprogram the channels into the tv. Use "autoprogram" it will be in the menu
...with the normal cd or radio is working?????? you should go to sound settings and enable sound from AUX1 or ...
...aux2, aux1, ovl2, ovl1, L1a, N, and a gnd. any ideas or anyone know of a place to get a diagram? I have 3 blacks wires daisy chained, 2 white wires, a brown, a single black and a green. I have the ...
there is no signal on the video out line on any source. you must set your background options to the source you want to use. aux1 aux2 ect Kieran
When I route either the main stereo outs or the aux1 and aux2 outs to another power amp, often one of the channels does not work. Make sure you use BALANCED TRS audio INTERCONNECT cables.
dvd is on I tried channel 3 and 4 I need help pleassssse Do you have a "source" button on your remote control? Try pressing that several times to see what source the DVD is on (HDMI, AUX1, AUX2, etc..
...play MP3. I have switched the AUX setting to on for both aux1 and aux2 yet when I am in that mode and plug in the mp3 nothing happens. Am I missing a step? Thankyou! Try this link: ...
...Aux1 or Aux2. Set this to match the type of device connected to the Auxiliary port, (The options are video, audio and OFF.) (When not in use, these should be set to OFF.) Then press the Source button ...
...fuse, where is it? There is no in line fuse , CIGAR/AUX2 fuse 20 amp under hood fuse box . Auxillary power outlet front AUX1 fuse 15 amp. pull cig lighter out an check for B+ voltage on orange wire
...AUX1/AUX2 on or off. the dimmer on or off. 1 Press M.C. to turn dimmer on or off. ... Press M.C. to display the setting mode. Press M.C. to select the segment of the clock. display you wish to set. ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions