Questions & Answers for: Sanyo autoprogram rca

Channels change without changing channels! I know that sounds strange...BUT, when we put the TV on one channel, it seems to go through all of the channels (while staying on the same number). I.E. I'll

...JACKS ONLY USING S-VIDEO JACK. IF JUST USING STANDARD VIDEO JUST A BLUE SCREEN WITH AUDIO. CAN AUTOPROGRAM TUNER AND SAYS NO SIGNAL. IF USING A/V JACKS, HAVE AUDIO ONLY WITH BLUE SCREEN. NO

...channels up to channel 13 that means in is standard tv mode or air. once you selected cable ...run autoprogram and it find all the channels for you. these newer sets, dont bother with looking for a ...

Tuning Sanyo VCR Can anyone help me, I have a Sanyo VHR H791E video recorder, I need to tune in the TV channels. Please Help. Press both channel buttons simultaineously for 3 seconds it will ...

...THE VCR AND CONNECT THE CABLE STRAIGHT TO THE TV ANTENNA--GO INTO THE MENU ON THE SET AND FIND AUTOPROGRAM-ENTER THAT AND IT AUTO FIND ALL CHANNELS THAT YOU ARE SUBSCRIBED TO AND SHOULD PICK UP ...

menu I have a 20 inch Sanyo TV. I need to autoprogram channels in, but auto program and channel search are in red and the cursor skips them on the menu screen. They should be green like the rst of the

...antenna signal under the main menu but it will not allow me to select it. go into menu of tv find autoprogram--activate it dont do anything til its done counting-unit will program ...

...is in the vcr mode. to get the channels to set,you have to autoprogram the tuner,and then they can be changed using the up down buttons. rca make a universal remote for 10 bucks that will run that ...

I cannot get channel 3, lost remote and no code for universal remote you need to go to the menu and autoprogram your tv. make sure your cable is directly to your tv to do this..

How do I autoprogram the t.v. without the remote? Hi, my name is John. Welcome. on the front of TV press menu, scroll to setup, select auto scan + Thanks for choosing FixYa....John