Questions & Answers for: auto tape

Ad

Question about PSYC ZS-D55 Cassette/CD Boombox

1 Answer

...tape tight. The auto-stop mech can get contaminated with dust, and not work, or the reel for some reason does not pull the tape tight enough to fully engage that piece and the result is a ticking ...

Ad

Question about KX-W321 Single Cassette Deck

2 Answers

...tape. the auto reverse is an attempt to rewind the tape because of confusion with no tape movement. your mecanism has failed, stuck in one position and the servo unit can not turn it back right. you ...

Ad

Question about ZR80 Mini DV Digital Camcorder

2 Answers

...it keeps shutting down whenIm using the camera??? If you're trying to use the camera as a webcam, just remove the tape. The auto power-off is a safety for keeping the tape from getting damaged.

Question about ZR80 Mini DV Digital Camcorder

1 Answer

...tape to auto reverse on the dual tape deck, and, what is the "OSD" button on the receiver for? This is an old Denon D-1250 shelf system. Thanks, OSD = On Screen Display Auto Reverse is a built-in ...

Question about ZR80 Mini DV Digital Camcorder

1 Answer

...auto-reverse is working properly? What do I do? Play a tape to the end.  If it reverses, it is working properly.Make sure that you have turned the auto-reverse feature on.  The switch is ...

Auto Tape Measure and there is a black slide button the bottom and when I slid it I cant get the tape to function automatically. Anyone know what this button is for? Check I think it to hold the blade

Question about Auto Tape Measure

1 Answer

...auto movement thru switch.Put in fresh batteries , doesn't go in/out . Bottom slide will still retract tape fine. Any ldeas ?? 1. Pull the tape out about 12-18 inches. 2. simultaneously pull the ...

Question about Auto Tape Measure

1 Answer

how to rewind a tape measure You'll need to take the tape casing apart but need special security torx bits to do that (a T-8 and T-9). Once apart (careful, two small springs inside) you can take the ...

Question about Auto Tape Measure

1 Answer

...tape Auto-eject mechanisms normally will eject the tape at the end of the tape. However, if the tape jams or is wound too tightly, it can cause the auto-eject to activate. This prevent tape breakage. ...

...auto tape decks that are not auto-reverse eventually have this problem. It is not usually the deck's fault, but it is with the tapes themselves. After many plays the tapes get wound too tight on the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

Ekse

Level 3 Expert

13434 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...