SETUP MENU will close. This completes clock time setting. AUTO CLOCK You can automatically set the clock by turning ?ON? the AUTO CLOCK function. When you want to set the auto clock function to ?OFF?,
Question about Magnavox DVD/VCR Dual Player
setup there should be an option to choose "AUTO" "PAL" or "NTSC" 3) choose "auto" then check if any change in screen color. for VCR, locate a switch or button indicating "PAL" "Auto""PAL SECAM" "NTSC"
...AUTO SETUP After following the manual to the letter, the setup procedure advances to the point where the loud test tones are heard from the left front speaker only. At this point I get an E-1 error ...
...Auto Setup automatically searches for the right code for your DVD player. For the most popular DVD player models, Auto-Setup takes a few minutes or less, however, less-common models can take much ...
Question about GameSpy 4.0 Digital Camera Deluxe
setup",press,don't hold,the "mode"button, auto mode should be 1st up, handheld 2nd...if left in setup too long,camera will shutoff to save the batteries.If you want to use the camera in handheld mode,
...Auto SP Setup?" When I turn on the receiver the message display reads "Auto SP Setup?"I can not turn it off. It goes through the setup procedure, one speaker to another. No sound is being produced. ...
...Auto MCACC Setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level. After ...
Question about X6675 All-In-One InkJet Printer
...the auto answer light on the Lexmark X6675 To turn on the Auto Answer for fax, on the control panel of your printer, press on Setup > Fax Setup > Ringing and Answering > Auto Answer >
AUTO SETUP. Note: To cancel the setup and return to the regular TV screen, press (^) or (v) to select CANCEL and press ENTER. 5. When the AUTO SETUP is complete, the regular TV screen appears. Notes:
Question about FD Trinitron WEGA KV-36HS510 36" TV
Auto Setup function for the channels. 1 Press POWER to turn on the TV. 2 Press TV FUNCTION on the remote control. 3 To continue running Auto Setup, press CH+. To exit Auto Setup, press CH-. Auto Setup
Usually answered in minutes!