Questions & Answers for: EliteGroup auto detect

...panel. I've also checked the status of the sound in the BIOS and the AC97 peripheral is set to Auto. There are only two options for the AC97 available: Auto and Disabled. I'm completely lost on ...

...no avail. I've also checked the status of the sound in the BIOS and the AC97 peripheral is set to Auto. There are only two options for the AC97 available: Auto and Disabled. I tried installing a

...motherboard wiring on pins sequence not exact and one connection not hooked up .also harddrive not auto-detecting please give model number in ...

some small jumpers on the board if it is not designed to auto-detect the processor. If you don't have the info on the board, check with Safemanuals.com or retrevo.com or Elite's website for a download

...BIOS and set it to boot from the Hard Drive tell the 1st boot dev to be hard drive hit auto detect button make sure u have jumpers on hard drive master then slave in middle one on cable ok update ...

...auto detect page: Intel Auto Detect Once there, click on the second blue link for Audio drivers and you will get a pop up with a link asking to Check your system for the latest drivers, Click on this ...

sata harddisk not detect ,what will we do Go into bio's and make sure it is set to run SATA or EIED. Also look to see that the detection mode is set to AUTO. Is it detecting the CD-Rom(s)?

detect ide1 and ide2 even bios setting set to auto Many times this problem is due to incorrect cable connections. Check your manual for correct cable connections of devices to IDE1 and IDE2. More than

...could I find instructions? Thanks !! Most motherboards no longer have any jumpers for memory, it's auto-detected. Most likely your motherboard doesn't support the size modules you've installed, or ...

...I restart the computer (and this happened during Windows setup and after) it freezes right after it auto-detects the hard drive. It won't let me enter BIOS or anything it just stops after it detects ...