...slow down the cut outs. Any suggestions? I would at least like to know what the problem is before calling in a repairman. The set is out of warranty. If still under warranty or if you have no ...
...Turn the volume on the TV all the way down. Its becasuse you have the sound come from both sources. its kinda fun to play with. I have the same issue. The audio seems to be okay through an antenna ...
Question about 50PF7220A Television
...audio reciever and it worked great back to normal. Not everyone has extra PC cords lingering around, however Doug says you can pick them up for like $5.00. However take your cord out of back of TV, ...
Question about WinFast GeForce4 MX4000 128MB DDR 8X AGP 2D/3D w/ TV-OUT Graphic Card
...slow and tried bringing it down to 1024-768, as soon as I applied this the screen went blank and the no 'signal sign' came up on my monitor,I could still hear the audio of the game but even after ...
audio or in the power supply itself . you will need the service manual a good trvm and a scope . to go through the system by system .injecting signals when needed to make parts of the set come alive .
audio/video store that handles RCA has almost a 100% success rate on knowing what causes this. This is a power supply problem. When you have all three occurrences (no screen, no sound and no backlight
...slow then 3 times fast. I have to unplug the set and wait for the red flashing to stop. Then plug it back in. Then audio is delayed for approx 2 minutes, then it comes on and everything is ok until ...
coming from a fan touching something, but at least, the small fan in the back seems Ok. The screen color and audio works fine. When I turn off the TV, I can hear the pitch of the noise lower, and then
...audio hooks up. It's not an image input issue as not even the tv's menu can be displayed, so I think the display is dead, but not just the display since like I mentioned there is no sound either. The ...
...slow to come on, such as clicking several times, then comes on. These power supply caps are easy to spot as they will be bulging on their tops. It could be the Inverter PCB, but again that is part of ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
