...receiver. I bought an iCable and plugged it into my iPod headset, and the other end into the audio connectors (i've tried plugging it in to all the audio connectors, but I can't get it to
TV`s require you to enter the AUDIO menu/setup selection on the TV remote controller, and then enable the AUDIO OUTPUT Jacks, this will turn off the TV built in speakers and engage the audio RCA Jacks
...audio input jacks of this unit to play back the source in Zone 2 or Zone 3. This unit does not output the audio signals input at the DIGITAL INPUT and HDMI jacks to the ZONE OUT jacks." Basically you ...
...audio signals input at the HDMI input jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit. CHOICE = OTHER HDMI component connected to ...
...cable for your iPod that converts the 3.5mm jack to regular RCA audio jacks. Then connect the RCA audio jacks to the jack of your RXV590. I hope this helps. Thanks and have a nice day. - ...
Audio Out jacks on the cable box, using the white plug for the left channel and the red plug for the right. Attach the plugs on the other end to the Audio In jacks on the Yamaha receiver. Use a second
...audio jacks. (Video In/Out plugs are further to the right.) Pioneer has the manual for the VSX820 on the product site: . The direct link to the manual is ...
...to connect a phonograph to the htr5640 Yes since most phonographs dont have audio jacks and where invented before man your best option is connecting a guitar pickup or microphone to the microphone ...
...audio in jacks, ant/cable jack and a digital audio out(coaxial)on my tv You need something like this: ...
...to cd player? Assuming the CD player has a standard 3.5mm headphone jack, get a 3.5mm to RCA audio connector. Put the 3.5mm plug into the headphone jack at the back of your CD player (or audio ...
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions