audio) all KOSS unit i encountered are power amp ICs problem, might be yours. usually what comes first dead is the subwoofer channel. try, take that IC off first, and if it doesnt work, look for 10ohm
Question about KS3102 System
my kenwood surround sounds fuse blew and know theres no sound? i have a kenwood sorround sound that i just got from a friend. i hooked it up and it worked realy good.. i wanted to hook up a nother ...
...Smartphone, Tablet, Portable DVD player, radio, and any other device, with a 3.5mm plug. Koss is an audio equipment design and manufacturing firm based in the United States. The KPH7 headphones are ...
...TV also. Please help!!!Thank You The TV is NOT a source of high quality sound. For the best serious audio I would recommend drawing the audio-only digital feed from the Cable Box via its highest ...
... Check to make sure the speakers are plugged in all the way into the aduio jack. Step 2. Ensure the audio cable is plugged into the correct audio port. Step 3. Check to ensure that the speaker knowb ...
No sound replaced the power amplifier ic,it's already burned out,also check for an open fusible resistor.resolder all cold solder around the amplifier i.c.
I have a koss ks4102 home theater system, i can not get the tv sound to play through the home system speakers Source the TV-related audio from the Cable Box,. Treat it like any other audio device.
how do i get sound from my tv to my surround sound speakers Make sure the cables are hooked into AUDIO OUT from the TV and AUDIO IN from the reciever.
I have connected the audio optical cable from my TV, but I couldn't get the koss system to work. Are there any other settings need to be set? Which channel should i use to get the sound AV1 or AV2
...mark? ! or a red X Right click to reinstall drivers click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the (((appropriate speakers))) also
Usually answered in minutes!
71 Questions
54 Questions
23 Questions
23 Questions
11 Questions