Questions & Answers for: Mitsubishi Eclipse assembly

headlamp assembly what is the correct way to remove the entire headlamp assembly on a 2001 eclipse gt. i need to re-wire the lights and replace the lightbulb retaining wire on the passenger side and ...

How to change headlight assemblies on 2008 Eclipse? I'm trying to change the headlight assemblies on my 2008 Mitsubishi Eclipse SE/GS. Does anybody know if I have to remove the bumper? Probably not. ...

how do I change the turn signal bulbs? front or back?the headlight assembly comes out,and the entire rear light assembly...both are crazy

how to adjust the head lights on my 2000 eclipse You should have two plastic nuts on each headlamp assembly, one will be for your high beams and one will be for your low beams. The nuts should be ...

How do I Remove Headlight Assembly on my 1998 Eclipse and is there anyplace I can go to get a diagram Things You'll Need: Replacement Headlamp 60/55W H13 Instructions Open the hood and find the front ...

clutch assembly need diagram of assembly clutch assembly autozone.com sign up its free then click on repair guides .... drive train....transaxle.....then manual trasaxle....then clutch it will give ...

...connection. If low-reverse pressure switch does not turn on, replace solenoid and pressure switch assembly. Recheck trouble codes. If trouble code resets, replace TCM. 4.Check and repair wiring ...

...in your mind having that done. A good idea is to take detailed photos recording to order of dis assembly. The whole instrument assembly and dash need to be removed. Mark both sides of all ...

...Where is it? Where is the fuel pump? Diagram of the fuel pump? The fuel pump is located in the pump assembly module inside the fuel tank. There are plenty of photos of the pump and the entire assemby ...

2003 Mitsubishi Eclipse GS. Need torque specs and sequence for rocker arm assembly on a Mitsubishi Eclipse GS 2.4, 16 valve. Had to time it due to bad water pump and took timing belt off too early ...