Question about Aquarius WMA56 Front Load Washer
...Aquarius Extra washine machine. Won't start.. Door light flashing and the machine won't start.new brushies in motor and new door lock fitted, but still no joy.Durm spins fine and the belts not ...
Question about Aquarius WF000 Front Load Washer
...aquarius+ wf740 When my machine is in full spin it's extremely loud but only when a load of washine is in, even really small loads cause a lot of noise. When the machine is empty it makes the normal ...
Washine machine won't turn last spin. Opened up washing machine and clothes wet. Put back on spin and the drum just rocks (and now at a standstill). Put clothes back on wash and drum is turning its ...
Question about Aquarius WD63 Front Load Washer/Dryer
Washine inside. I have a Hotpoint Aquarius 1100 Washer Dryer Model is WD61 or WD62. Not quite sure as it came with the flat I bought, but I have the instruction manual. After full wash cycle, the door
...aquarius WASHINING MACHINE drum is making grinding noise is it the brushes if so where do they get replaced Hi, Remove the drive belt from the drum & motor then turn the drum be hand, Is it noisy? if ...
...Aquarius wf320 door won't open. My washine machine door won't open. The 'door locked' indicator light has went out to let me know that it's open but I can't open the door. I tried putting it through ...
Question about Aquarius WMA42 Front Load Washer
...aquarius extra washing machine IPX4 = 1669200001 Failed to spin @ the end of cycle. Is it possible to have a wireing digram for this modle if it pumped out ok could be worn motor brushes... my door ...
Question about Aquarius WF000 Front Load Washer
...washine machine door won't open. The 'door locked' indicator light has went out to let me know that it's open but I can't open the door. I tried putting it through another cycle and switching it off ...
Question about Aquarius WD63 Front Load Washer/Dryer
hi i have a hotpoint washin machine and it kepp showing H20 on the csreen can you please help th model number is WT740 H20 indicates a problem with water supply. Check the inlet hose/s for ...
when washin drying my black shirt get covered in bits The machine likely has had a paper towel washed / dryed in it. There are still pieces of it hanging around. It should clear up over time. Charlie
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
